Bondtech CHT BiMetal Vol Coated Nozzle

Copper and Hardened Steel nozzles for high flow applications with abrasive materials.
Nozzles are supplied with Nickel Coating (grey color).
 
Increase the Max Volumetric Flow of your Volcano style heat block.
 
These nozzles are manufactured by Bondtech in-house,
and will fit the following blocks/printers:
E3D Volcano blocks
Other Volcano type blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder
Others compatible with Volcano…
 
ALERT : Avoid Cold Change Of Bondtech CHT Nozzles
Copper is a soft material and doesn't withstand high mechanical efforts.
Before removing or tightening any Bondtech CHT nozzle, heat it up to 280C, or at least above 250C.
Use at most 1.0 Nm torque. Recommended Torque is 0.5 Nm.
ALERT : Size limitation for fiber loaded filaments
For Carbon or Glass fiber loaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.
ALERT : For particle loaded filaments
For metal, wood, glitter or other particle loaded abrasive filaments you may use the 0.4mm nozzle size.
 
Bondtech CHT BiMetal Vol Coated Nozzle Features
Copper body;
Hardened Steel inserts;
Nickel Coating;
1 unit per pack;
Available sizes : 0.40, 0.60, 0.80, and 1.0mm;
Optimized for 1.75mm filament;
Compatible with 2.85mm filament.
Requires 6mm wrench
 
Bondtech CHT BiMetal Vol Coated Nozzle Advantages
Abrasive-proof to work with Carbon and Glass fiber composite materials;
Higher melt capacity by increasing the surface area of the heating walls
Flow Rate gains between 25 and 65%
Competitive price/performance price
Machined with ultra-precision
Copper body and Hardened Steel inserts nozzle with Nickel coated surface
Follows nozzle standard:
Volcano (M6×1×14.5×21)
May be used with 1.75 or 2.85mm hotends.
 
Flow Rate gains may vary. Results depend on the hardware, materials and print settings used.